Stainless Steel Fragrance Oil 16910 - Rustic Escentuals
Fragrance Oils Fragrance Oils by Category Masculine Scents - (You Are Here - P16910)

Stainless Steel Fragrance Oil 16910

$4.20 for 1 oz
$7.30 for 2 oz
$13.05 for 4 oz
$20.00 for 8 oz
$27.65 for 16 oz

Additional Information
Ever wondered what stainless steel smells like? This is our interpretation. A beachy, clean, masculine scent that is both musky and clean... ideal for men's products. A perfect blending of lemon and lime citrus, marine and ozonic notes, moss, tonka, lily of the valley and jasmine florals, and a clean watery sparkle. A fresher scent than typical manly fragrances.

CP Notes:
No discoloration or acceleration, scent remained strong and true, worked beautifully! One tester reported that soap wanted to rice after adding this fragrance and had to be whisked a long time before it came back together. They also reported it turning a tan color after cure.

Flashpoint: 202°
Vanilla Content: 0.00%
Country Of Origin: United States
Phthalates: Product is Phthalate Free

Cold Process Soap Test Results:

We test fragrances with the recipe of 50% olive oil, 20% sunflower oil,
15% coconut 76, 10% shea butter, 5% castor. No water discount.
Acceleration: None Color After Cure: None

IFRA Maximum Skin Exposure Levels:
Baby Lotion: 3.05% Bath Water: 17.64% Body Lotion: 12.76%
Body Powder: 12.76% Body Wash: 17.64% Candle: 100.00%
Conditioner: 17.64% Deodorant: 10.37% Dry Shampoo: 8.51%
Eye: 4.58% Face Cream: 9.05% Face Mask: 4.58%
Face Wash: 17.64% Hand Cream: 9.05% Lip: 0.00%
Perfume: 100.00% Pet Shampoo: 17.64% Pet Spray: 72.94%
Reed Diff.: 17.64% Shampoo: 17.64% Shave Cream: 17.64%
Soap: 17.64%

Rustic Escentuals, Inc. certifies that this fragrance product is in compliance with the standards of the International Fragrance Association, provided the fragrance is used in the above application (s) at the noted maximum concentration level(s).

The "Maximum Use Level for Skin Exposure" is the amount of fragrance, flavor and essential oil that can come in contact with the skin. It does not mean that your base product can perform at these levels. You must test each oil in each application for evaluation of desired performance. Baby products have lower use levels than those listed above. If a desired application is not listed above, please call us at 216-503-9361 for maximum skin levels for skin exposure.

Helpful Product Information:
Alcohol Free: Yes Bath/Body Safe: Yes
Cruelty Free: Yes Gel Safe: Yes
Gluten Free: Yes M&P Soap Safe: Yes
Non-GMO: Yes Paraffin Wax: Yes
Soy Free: Yes Vegan Friendly: Yes

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):

Common Name Ingredient Listing (FDA Approved):

All About IFRA

We have IFRA on all fragrance oils and flavor oils on our website.

What do the maximum levels mean? Let's use Almond Paradise as an example. The IFRA guidelines on this state that there are no restrictions for soaps, shampoos, lotions, etc. So does that mean you can use 100% in your product? No. That would mean your product consists of straight fragrance oil.

The IFRA states the *max* that can be used, not the recommended amount. It is the responsibility of the maker to do their research to see what the recommended usage rate of fragrance oil for their particular recipe is.

For soap, as a general rule of thumb you will use up to 5% of fragrance oil in Cold Process (CP) soap and up to 3% in Melt and Pour (M&P) soap.

So, if you see a fragrance oil and the IFRA says 23% for soap, don't use 23%. IFRA is important when it comes to lower numbers. There are a few fragrance oils that have max usage rates that are less than the percentages shown above. In that case, you can only use the max shown for the oil.
SDS & Documents
Click to download the SDS and Allergens files for this fragrance oil. Stainless Steel SDS pdf document Stainless Steel Allergens pdf document
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (0)
CustomerReviews (3)
Submit A Rating Average Customer Rating: (3 Reviews)

Monica • California

Date Submitted:  12/17/2021

I Recommend This Product!
"Love it!"
COMMENTS:  I love this scent. It's a clean and fresh scent. I just used it yesterday so I'm not sure how it will last in my soap but out of the bottle it was great and it behaved well.
PRODUCT USED IN:   Soap - Cold Process
Matthew • California

Date Submitted:  08/10/2021

I Recommend This Product!
"Perfect to soap with!"
COMMENTS:  This soap smells just like....stainless steel believe it or not! Soaped perfectly with no acceleration. Love this scent!
PRODUCT USED IN:   Soap - Cold Process
Stephanie • New York

Date Submitted:  02/18/2017

I Recommend This Product!
"When I first ordered this..."
COMMENTS:  When I first ordered this, I thought it was going to smell terrible..I was so wrong it smells AMAZING!!
Customer Photos (0)
Stay updated on sales, new products, free recipes, and more.